Author Topic: T300 - Wheel off center to drive straight  (Read 776 times)

Avani

  • Posts: 3
Dear reader,

After many tries I've come to no solution. Wreckfest detects my T300 wheel just fine, but in order to drive straight I have to turn my wheel ~40 degrees. (see picture)

Some settings:

Wheel: Thrustmaster T300
Degrees of rotation: 900

Saturation: 100
Offset: 0
Sensitivity: 0



Purple44

  • *
  • Posts: 8491
Have you tried going to settings> Controls and scrolling over to the T300 window and click the Unbind All button. Then with steering wheel straight up, go through and rebinding steering wheel and the rest?
Flatout Joint, where the mods were.

i5 2500 i7 8700, 16GB, Nvidia 660 960 1060 6GB, Win 10 64bit, DFGT Wheel

Avani

  • Posts: 3
Have you tried going to settings> Controls and scrolling over to the T300 window and click the Unbind All button. Then with steering wheel straight up, go through and rebinding steering wheel and the rest?

It worked! I guess I kept my wheel turned slightly when binding either steer left or steer right. Weird that Wreckfest doesn't just register the axis but also registers how much your wheel is turned.

Thanks for your help!