Author Topic: Randomly Crashing - No early access file to remove  (Read 92 times)

eglosenger1

  • Posts: 1
Love the game so far.  I have played on medium to low settings and out of the blue game would freeze.  Been researching since yesterday and none of the solutions found had no effect.  Thanks in advance!

Lenovo Z585 laptop
Radeon Software Version - 16.2.1
Radeon Software Edition - Crimson
Graphics Chipset - AMD Radeon HD 7660G
Memory Size - 512 MB
Memory Type - DDR3
Core Clock - 686 MHz
Windows Version - Windows 10
System Memory - 16 GB
CPU Type - AMD A10-4600M APU with Radeon(tm) HD Graphics

Purple44

  • *
  • Posts: 8350
In did setup a profile?

MY PRIMARY DISPLAY ADAPTER IS NOT DETECTED BY THE GAME!
Most likely you need to create a profile for the game in the display adapter settings and make sure the profile is set to use the primary display adapter. If you're using NVIDIA Optimus, create a new profile in the NVIDIA Control Panel under 3D Settings/Manage 3D Settings for the game, and make sure that 'High-Performance NVIDIA processor' is selected as the preferred graphics processor in Program Settings. For AMD users, the process is pretty much the same. Furthermore, if your laptop has an on-board switch for selecting between Stamina and Speed modes, make sure that Speed is selected; the primary displayer adapter is available only in the Speed mode.
Flatout Joint, where the mods were.

i5 2500 i7 8700, 16GB, Nvidia 660 960 1060 6GB, Win 10 64bit, DFGT Wheel